Thanks for that answer! business was in the glasses changed and everything lightfields was fine But

Newbie Members 14 posts
It is understood that they are not. D Instructions: "Possible Cause: An error occurred in the engine loss glasses." (An error occured at the cup fall motor). "Remedy: Check the micro-switch lightfields that controls the end of the cycle emission glasses and engine power of their loss." (Check the micro-switch which controls the end of the cycle of the cup fall and the power supply of the cup fall motor). PS: translated by Yandex, the accuracy is questionable, but the meaning is clear. Up
It is understood that they are not. D Instructions: "Possible Cause: An error occurred in the engine loss glasses." lightfields (An error occured at the cup fall motor). "Remedy: Check the micro-switch that controls the end of the cycle emission glasses and engine power of their loss." (Check the micro-switch which controls the end of the cycle of the cup fall and the power supply of the cup fall motor). PS: translated by Yandex, the accuracy is questionable, but the meaning is clear. I too have read the question is, where the microswitch and motor loss.? And how to check? .. Up
Yes bottom, under the shelf supports glasses. Remove the plastic trim - and here they are. Just yesterday lightfields drobralsya before the remote machine, which refused to Choteau, and during disassembly which could make the necessary foty. Otfotal, sm.vnizu. Besides, to me like Zopa happened: worked fine, but once inserted into the hall half-cylinder main pillar glasses went "error 25" ("check engine issue glasses"). In it, and in fact it is necessary to check Choteau: while booting OSes after the swirling white rollers lightfields issue glasses and outputs 2-3 empty glasses while booting (it rotates right Dvigun issue), a second later begins dvizhuhu left (turn half-cylinder) and then hangs with custom error 25! ... Colleague on the phone said that these videos in the normal position must be some "cuts down", but I have not found so cut .. 23/10/2013 21-05-02.JPG 38.29K 21 Number of downloads: 25/10/2013 14-55-32.JPG 39.44K lightfields 30 Number of downloads: 10/25/2013 14-56-16.JPG 42.61K 28 Downloads:
Yes bottom, under the shelf supports glasses. Remove the plastic trim - and here they are. Just yesterday drobralsya before the remote machine, which refused to Choteau, and during disassembly which could make the necessary foty. Otfotal, sm.vnizu. Besides, to me like Zopa happened: worked fine, but once inserted into the hall half-cylinder main pillar glasses went "error 25" ("check engine issue glasses"). lightfields In it, and in fact it is necessary to check Choteau: while booting OSes after the swirling white rollers issue glasses and outputs 2-3 empty glasses while booting (it rotates right Dvigun issue), lightfields a second later begins dvizhuhu left (turn half-cylinder) and then hangs with custom error 25! ... Colleague on the phone said that these videos in the normal position must be some "cuts down", but I have not found so cut .. 23/10/2013 21-05-02.JPG 2013-10-25 lightfields 14-55-32.JPG 2013-10-25 14-56-16.JPG thank you for that answer! Matter was in the glasses, and everything changed became normal Top
Thanks for that answer! business was in the glasses changed and everything lightfields was fine But not for that, you would not really help .. Another colleague explained that the right motor can act up minivan (switch), shut the engine power loss after issuing cups 1 cup. If you have this node has not been adjusted under the inserted glasses, you can either adjust the menu or as you change the type of glasses. But I have something these glasses have long worked, lightfields just insert semicylinder lightfields back after repair, and here he haywire Choteau ...
Yes, the other day I coped with this problem: random position put white spots on their understanding (just trohi provernuv their axis) - to the vertical line passing through the ends of the upper and lower shelves for these commercials, was as close as possible to the axis of the tube issuing glasses - and it work! Still guessing .. Later I explained familiar that sometimes these rollers lightfields are turned, and because there are various problems .. Up
Reply to quoted posts Clear Independent Forum for vending - business with vending lightfields machines vending Practice Rheavendors Rules